Ua hana ʻo Kina i ka PCB kiʻekiʻe kiʻekiʻe no GPS me ka ENIG a me ka manamana gula
ʻIke kumu
| Hōʻike No. | PCB-A51 |
| Puke halihali | Hoʻopaʻa ʻumehana |
| Palapala hōʻoia | UL, ISO9001 & ISO14001, RoHS |
| Palapala noi | Mea uila uila |
| Wahi liʻiliʻi/Line | 0.075mm/3mil |
| Kapa Hana Hana | 50,000 sqm / mahina |
| HS Code | 853400900 |
| Ke kumu | Hana ʻia ma Kina |
Hōʻike huahana
FR4 PCB Hoʻolauna
'O FR 'o ia ka "flame-retardant," FR-4 (a i 'ole FR4) he papa inoa NEMA no ke aniani-reinforced epoxy laminate material, he mea i haku 'ia me ka lole fiberglass i ulana 'ia me ka epoxy resin binder e lilo ia i substrate kūpono no na mea uila. ma ka papa kaapuni i paiia.
ʻO nā pono a me nā pōʻino o FR4 PCB
He mea kaulana loa ka mea FR-4 ma muli o kona mau ʻano maikaʻi e hiki ke pōmaikaʻi i nā papa kaapuni paʻi.Ma waho aʻe o ke kumukūʻai a me ka maʻalahi o ka hana ʻana, he insulator uila me ka ikaika dielectric kiʻekiʻe loa.ʻOi aku ka lōʻihi, kūpaʻa i ka wai, kūpaʻa i ka mahana a me ka māmā.
ʻO FR-4 kahi mea pili ākea, kaulana loa no kona kumu kūʻai haʻahaʻa a me ka paʻa ʻana o ka mīkini a me ka uila.ʻOiai e loaʻa ana kēia mea waiwai i nā pōmaikaʻi nui a loaʻa i nā ʻano mānoanoa a me nā nui, ʻaʻole ia ke koho maikaʻi loa no kēlā me kēia noi, ʻoi aku ka nui o nā noi kiʻekiʻe e like me RF a me nā hoʻolālā microwave.
Hoʻolālā PCB papa nui
Hoʻonui hou ka Multilayer PCB i ka paʻakikī a me ka nui o nā hoʻolālā PCB ma o ka hoʻohui ʻana i nā papa ʻē aʻe ma mua o nā papa luna a me lalo i ʻike ʻia ma nā papa ʻaoʻao ʻelua.Kūkulu ʻia nā PCB multilayer e ka laminating i nā papa like ʻole.Hoʻopaʻa pū ʻia nā papa-loko, nā papa kaapuni ʻaoʻao ʻelua, me nā ʻāpana insulating ma waena a ma waena o ke keleawe-foil no nā papa-waho.ʻO nā puka i wili ʻia ma ka papa (vias) e hoʻopili ai me nā papa like ʻole o ka papa.
ʻenehana & hiki
| 'ikamu | Kapa Hana Hana |
| Helu Lapa | 1-32 |
| Mea waiwai | FR-4, High TG FR-4, PTFE, Aluminum Base, Cu base, Rogers, Teflon, etc. |
| Nui Nui | 600mm X1200mm |
| Papa Outline tolerance | ±0.13mm |
| Mānoanoa Papa | 0.20mm–8.00mm |
| Mānoanoa hoʻomanawanui (t≥0.8mm) | ± 10% |
| Mānoanoa Tolerancc(t<0.8mm) | ±0.1mm |
| Mānoanoa Layer Insulation | 0.075mm–5.00mm |
| Iine liʻiliʻi | 0.075mm |
| Wahi liʻiliʻi | 0.075mm |
| Ka Manoanoa keleawe o waho | 18um–350um |
| Mānoanoa keleawe o loko | 17um–175um |
| Luwaha wili (Mechanical) | 0.15mm–6.35mm |
| Hole Hoʻopau (Mechanical) | 0.10mm–6.30mm |
| Ka hoʻomanawanui ʻana (Mechanical) | 0.05mm |
| Kakau inoa (Mechanical) | 0.075mm |
| Aspecl Ratio | 16:01 |
| ʻAno Māka Solder | LPI |
| SMT Mini.Solder Mask Laulā | 0.075mm |
| Mini.Solder Mask Clearance | 0.05mm |
| Anawaena Puka Puka | 0.25mm–0.60mm |
| Ka hoʻomanawanui impedance | 10% |
| Hoʻopau ʻili | HASL/HASL-LF, ENIG, Immersion Tin/Kila, Flash Gula, OSP , Manamana gula, Gula paa |
No hea mai ka mea resin ma ABIS?
ʻO ka hapa nui o lākou mai Shengyi Technology Co., Ltd. (SYTECH), ʻo ia ka lua o ka mea hana CCL nui loa ma ka honua e pili ana i ka nui o ke kūʻai aku, mai 2013 a 2017. Ua hoʻokumu mākou i nā pilina lōʻihi o ka hui ʻana mai 2006. ʻO ka FR4 resin material (Model S1000-2, S1141, S1165, S1600) hoʻohana nui ʻia no ka hana ʻana i nā papa kaapuni paʻi hoʻokahi a me ʻelua ʻaoʻao a me nā papa ʻāpana-nui.Eia nā kikoʻī no kāu kuhikuhi.
No FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
No CEM-1 & CEM 3: Sheng Yi, Papa Alii
No ke alapine kiʻekiʻe: Sheng Yi
No ka UV Cure: Tamura, Chang Xing ( * Loaʻa ke kala: ʻOmaomao) Solder no ka ʻaoʻao hoʻokahi
No ke kiʻi wai wai: Tao Yang, pale (kiʻiʻoniʻoni wet)
Chuan Yu ( * Loaʻakala kala: Keʻokeʻo, Hiki ke Manaʻo ʻia Solder Melemele, Poni, ʻulaʻula, Polū, ʻōmaʻomaʻo, ʻeleʻele)
Kaʻina hana PCB
Hoʻomaka ke kaʻina hana me ka hoʻolālā ʻana i ka Layout o ka PCB me ka hoʻohana ʻana i kekahi polokalamu hoʻolālā PCB / CAD Tool (Proteus, Eagle, a i ʻole CAD).
ʻO ke koena o nā ʻanuʻu o ka Hana Hana ʻana o kahi Papa Kaapuni Paʻi Paʻi ʻia e like me ka PCB ʻaoʻao hoʻokahi a i ʻole PCB ʻaoʻao ʻelua a i ʻole PCB multi-layer.
Q/T Lead Time
| Māhele | Manawa alakai wikiwiki loa | Manawa alakai ma'amau |
| ʻaoʻao ʻelua | 24 hola | 120 hola |
| 4 Papahana | 48 hola | 172 hola |
| 6 Papahana | 72 hola | 192 hola |
| 8 Papahana | 96 hola | 212 hola |
| 10 Papa | 120 hola | 268 hola |
| 12 Papa | 120 hola | 280 hola |
| 14 Papahana | 144 hola | 292 hola |
| 16-20 Papa | Ma muli o nā koi kiko'ī | |
| Ma luna o 20 Layer | Ma muli o nā koi kiko'ī | |
ʻO ka neʻe ʻana o ABIS e kāohi iā FR4 PCBS
Hoomakaukau Puka
Ke wehe pono nei i ka ʻōpala a me ka hoʻoponopono ʻana i nā ʻāpana mīkini drill: ma mua o ka hoʻopili ʻana me ke keleawe, nānā nui ʻo ABIS i nā puka āpau ma kahi FR4 PCB i mālama ʻia e wehe i nā ʻōpala, nā hewa ʻole o ka ʻili, a me ka epoxy smear, ʻo nā lua maʻemaʻe e hōʻoia i ka paʻa pono ʻana o ka plating i nā paia puka. .no hoi, i ka hoomaka ana o ke kaʻina hana, drill machine parameter ua hoʻoponopono pololei.
Hoʻomākaukau ʻili
Hoʻopau me ke akahele: e ʻike mua kā mākou poʻe ʻenehana loea ʻo ke ala wale nō e pale aku ai i kahi hopena maikaʻi ʻole ʻo ka manaʻo ʻana i ka pono o ka lawelawe kūikawā a me ka hana ʻana i nā hana kūpono e hōʻoia i ka hana pono a me ka pololei.
Uku Hoonui wela
Maʻa i ka hana ʻana i nā mea like ʻole, hiki iā ABIS ke kālailai i ka hui ʻana i mea e maopopo ai ua kūpono ia.a laila mālama i ka hilinaʻi lōʻihi o ka CTE (coefficient of thermal expansion), me ka CTE haʻahaʻa, ʻoi aku ka liʻiliʻi o ka pale ʻana i nā lua mai ka hoʻololi pinepine ʻana o ke keleawe e hoʻopili ai i nā pilina o loko.
Ka hoʻonui ʻana
Hoʻonui ʻia ka mana ʻo ABIS i ka circuitry e nā pākēneka i ʻike ʻia ma ka kali ʻana i kēia nalowale i hiki ai i nā papa ke hoʻi i ko lākou mau ana i hoʻolālā ʻia ma hope o ka pau ʻana o ka pōʻai lamination.no hoi, ka hoʻohana 'ana i ka baseline scaling paipai 'ana i ka hui 'ana me ka 'ikepili kaʻina hana helu i loko o ka hale, e dial-i nā kumu unahi e like me ka manawa i loko o ia wahi manufacturing.
Mīkini
Ke hiki mai ka manawa e kūkulu ai i kāu PCB, e hōʻoia ʻo ABIS e koho ʻoe i nā lako kūpono a me ka ʻike e hana pono ai i ka hoʻāʻo mua.
Misiona Pono ABIS
ʻO ka helu o nā mea e hiki mai ana ma luna o 99.9%, ʻo ka helu o ka nui o ka hōʻole ʻana ma lalo o 0.01%.
Mālama nā ʻoihana i hōʻoia ʻia e ABIS i nā kaʻina hana nui e hoʻopau i nā pilikia āpau ma mua o ka hana ʻana.
Hoʻohana ʻo ABIS i nā polokalamu holomua e hana i ka loiloi DFM nui ma nā ʻikepili e hiki mai ana, a hoʻohana i nā ʻōnaehana hoʻokele maikaʻi i ka wā o ke kaʻina hana.
Hana ʻo ABIS i ka 100% nānā ʻike a me AOI a me ka hoʻokō ʻana i ka hoʻāʻo uila, ka hoʻāʻo uila kiʻekiʻe, ka hoʻāʻo impedance control, micro-sectioning, thermal shock testing, solder testing, reliability testing, insulating resistance testing and ionic cleanliness testing.
Palapala
No ke aha i koho ai iā mākou?
- ʻO nā mīkini koho kiʻekiʻe-kiʻekiʻe euipment-kiʻekiʻe e hiki ke hana ma kahi o 25,000 mau mea SMD i kēlā me kēia hola
- Hiki ke hoʻolako maikaʻi loa 60K Sqm i kēlā me kēia mahina-Ke hāʻawi nei i ka haʻahaʻa haʻahaʻa a me ka noi PCB hana, a me ka hana nui.
- 'Oihana 'enekinia hui-40 'enekinia a me ko lakou hale ponoi, ikaika ma OEM.Hāʻawi i nā koho maʻalahi ʻelua: ʻike Kuʻuna a me ka ʻike hohonu o ka IPC Class II a me III Standards
Hāʻawi mākou i kahi lawelawe EMS hulina piha i nā mea kūʻai aku e makemake iā mākou e hōʻuluʻulu i ka PCB i PCBA, me nā prototypes, papahana NPI, liʻiliʻi a me ka leo liʻiliʻi.Hiki iā mākou ke hoʻopuka i nā mea āpau no kāu papahana hui PCB.Loaʻa i kā mākou poʻe ʻenekinia a me kā mākou hui sourcing ka ʻike waiwai i ke kaulahao lako a me ka ʻoihana EMS, me ka ʻike hohonu i ka hui SMT e hiki ai ke hoʻoholo i nā pilikia hana āpau.ʻO kā mākou lawelawe he kumu kūʻai, maʻalahi, a hilinaʻi.Ua ʻoluʻolu mākou i nā mea kūʻai aku ma nā ʻoihana he nui e pili ana i ka lāʻau lapaʻau, ʻoihana, automotive a me nā mea hoʻohana uila.
FAQ
Mea Hoʻolako Nui (FR4): Kingboard (Hong Kong), NanYa (Taiwan), a me Shengyi (Kina), Inā ʻē aʻe, e ʻoluʻolu iā RFQ.
Nānā i loko o 12 hola.Ke nānā ʻia ka nīnau a Engineer a me ka faila hana, e hoʻomaka mākou i ka hana.
ʻAʻole, ʻaʻole hiki iā mākou ke ʻae i nā faila kiʻi, inā ʻaʻohe āu faila gerber, hiki iā ʻoe ke hoʻouna mai iā mākou i kahi laʻana e kope iā ia.
Kaʻina hana kope PCB&PCBA：
ʻO kā mākou mau kaʻina hana hōʻoia maikaʻi e like me lalo:
a), Nānā Kiʻi
b), ʻImi lele, mea paahana
c), Ka hoʻomalu impedance
d), ʻIke hiki ke kūʻai
e), ʻenekini kikohoʻe metallo graghic
f), AOI (Nānā Optical Aunoa)
ʻAe, hauʻoli mākou i ka hāʻawi ʻana i nā laʻana modula e hoʻāʻo a nānā i ka maikaʻi, loaʻa nā ʻāpana hāpana hui.E ʻoluʻolu e uku ka mea kūʻai aku i ke kumukūʻai hoʻouna.
ʻOi aku ka nui o ka hāʻawi manawa ma mua o 95%
a), 24 hola huli wikiwiki no ka ʻaoʻao ʻelua prototype PCB
b), 48 hola no 4-8 papa prototype PCB
c), 1 hola no ka ʻōlelo ʻana
d), 2 hola no ka nīnau ʻenekinia/manaʻo hoʻopiʻi
e), 7-24 mau hola no ke kākoʻo ʻenehana / lawelawe kauoha / hana hana
Hana ʻo ABlS i ka 100% nānā ʻike a me AOl a me ka hoʻokō ʻana i ka hoʻāʻo uila, ka hoʻāʻo uila kiʻekiʻe, ka hoʻāʻo ʻana i ka impedancecontrol, ka micro-sectioning, ka hoʻāʻo ʻana i ka wela, ka hoʻāʻo solder, ka hoʻāʻo ʻana i ka hilinaʻi, ka hoʻāʻo ʻana i ka pale ʻana., hoʻomaʻemaʻe ionica me ka hoʻāʻo ʻana o ka PCBA.
| Iecaianoaaiiuo hiki o wela-kūʻai huahana | |
| ʻO ʻaoʻao ʻelua/Multilayer PCB Workshop | Hale Hana PCB Aluminum |
| Hiki i ka ʻenehana | Hiki i ka ʻenehana |
| Nā mea waiwai: CEM-1, CEM-3, FR-4(TG kiʻekiʻe), Rogers, TELFON | Nā mea waiwai: Ke kumu alumini, Ke kumu keleawe |
| Layer: 1 papa i 20 Layer | Layer: 1 papa a me 2 Layer |
| Min.line laula: 3mil/3mil(0.075mm/0.075mm) | Min.laina laula/wahi: 4mil/4mil(0.1mm/0.1mm) |
| Min.Hole nui: 0.1mm (dirilling puka) | Min.Ka nui o ka puka: 12mil(0.3mm) |
| Max.Nui papa: 1200mm* 600mm | Nui ka nui o ka papa: 1200mm* 560mm(47in* 22in) |
| Ka mānoanoa o ka papa i pau: 0.2mm- 6.0mm | Pau ka mānoanoa o ka papa: 0.3 ~ 5mm |
| Ka mānoanoa o ke keleawe: 18um~280um(0.5oz~8oz) | Ka mānoanoa o ke keleawe: 35um~210um(1oz~6oz) |
| NPTH Hole Hoʻomanawanui: +/-0.075mm, PTH hole hoʻomanawanui: +/-0.05mm | Ka hoʻomanawanui kūlana puka: +/-0.05mm |
| Hoʻomanawanui Outline: +/-0.13mm | Ka hoʻomanawanui outline outline: +/ 0.15mm;ke kuʻi ʻana i ka hoʻomanawanui: +/ 0.1mm |
| Hoʻopau ʻia ka ʻili: HASL me ke alakaʻi ʻole, ke gula kaiapuni (ENIG), ke kala kaiapuni, OSP, ka uhi gula, manamana gula, Carbon INK. | Hoʻopau ʻia ka ʻili: ke alakaʻi manuahi HASL, ke gula immersion (ENIG), ke kālā immersion, OSP etc |
| Ka hoʻomanawanui ʻana o ka Impedance: +/-10% | Noho ka mānoanoa hoʻomanawanui: +/-0.1mm |
| Hiki ke hana: 50,000 sqm / mahina | MC PCB Hiki i ka hana: 10,000 sqm / mahina |
a), 1 Hola olelo
b), 2 hola o ka manaʻo hoʻopiʻi
c), 7*24 hola kākoʻo ʻenehana
d), 7*24 lawelawe kauoha
e), 7*24 hola hoʻouna
f), 7*24 holo hana
ʻO kā mākou mau kaʻina hana hōʻoia e like me lalo:
a), Nānā Kiʻi
b), ʻImi lele, mea paahana
c), Ka hoomalu impedance
d), ʻike hiki ke kūʻai
e), ʻeleu ʻeleʻele metallograghic kikohoʻe
f),AOI(Nānā Optical Automated)
